Corrugated Bitumen Roof Sheet Batten Cloaking Piece
£ 10.54(Inc VAT £12.65)
Coroline and Onduline Batten Cloaking Piece for Bitumen Roof Sheets are 1220mm Long and in Black Only. Used With Ventilator Strips to Prevent Water Ingress and Provide a Smarter Finish with 1120mm Cover
Order in the next Hours Mins and Seconds,
To get your watch delivered on Tuesday
In Stock

Corrugated Bitumen Roof Sheet Batten Cloaking Piece

The Coroline and Onduline Corrugated Bitumen Sheets are a Tough, Environmentally Freindly Roofing and Cladding option. Made from Bitumen Saturated Organic Fibres, this Lightweight Material comes as the 2.6mm Coroline option or Onduline which is 3mm Thick.

Used With Ventilator Strips to Prevent Water Ingress and Provide a Smarter Finish with 1120mm Cover

  • Garden Sheds
  • Garages
  • Stables
  • Agricultural Buildings
Availability: In stock
Estimated Delivery: 5 working days
Manufacturer: Ariel Plastics
Product Code: OBG (Black)

►Return to product list

We offer a free standard delivery service on all orders over £500.00*. Orders under £500.00* will be charged £15.00* carriage.
Our standard delivery area covers mainland England, Scotland (Excluding Highlands) and Wales. For all other areas around the UK an additional delivery charge will need to be applied, we will advise you of this charge before your order is dispatched. For deliveries to these areas we are happy to provide a free quotation upon request.


We will always do our best to deliver stocked items ordered via our website within 3-5 working days. This applies to  goods ordered before 12.00pm and in stock.
Some of our products, because of their size (5m and over) and weight (over 80 kilos), have an estimated 3 to 5 working day lead time but we will endeavour to get them to you as soon as possible.
All the Roof Vent Products are made to order and have an estimated 7-10 working day lead time. This can be reduced for sites wishing to call off quantities that have been given to us in advance (call for further information). Please note: All Roof Vents are made to order and non returnable.
The Mardome Hi-Lights Range of Dome Rooflights have a 48 hour delivery schedule. Orders must be received by 1pm to qualify for the 48 hour (2 working days) delivery. Only available to mainland GB (excluding postcode areas begining KW, IV, AB, and PH)
CORRAPOL-BT Bitumen Roofing Sheets 1-2 working days.
We regret that timed deliveries cannot be given. Deliveries will be made between 8.00am and 5.30pm Monday to Friday.


All deliveries should be signed for and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.


Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs in the course of such unloading.
Any shortages must be reported within 48 hours.

If goods aren't sent by our own vehicles they are sent by reputable carriers such as Tufnell's, Fed-Ex  and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded as close as possible to the property whilst remaining on a hard standing surface.


Please do not arrange any labour until your materials are on site as we are unable to compensate you for your time in the event of a late delivery.
If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 267 or email: customerservices
*excluding VAT

Corrugated Bitumen Sheet Installation Guide

1. Starting
Purlins must be at the correct centres and not less than 25mm square, supported by rafters. A useful tip to keep the purlins square to the eaves is to use a timber spacer.

2. Cutting
Use a fine toothed hand saw or circular power saw if cutting is necessary, and to prevent binding apply general purpose lubricating oil to the cut.

3. Laying The Sheets
Commence fixing sheets at the opposite end of the roof to prevailing winds. Stagger the sheets using half a sheet to start the second course.

4. Fixing
Nail through sheet crown into purlins or decking. Nail every corrugation at sheet overlaps and at the top and bottom of the slope. Nail centres may be reduced to alternate corrugations at intermediate purlins. To work out how many fixings are required, divide the roof width by the fixing centres, then divide the roof length by the support centres and add three. Multiply these two values together to give you an approxiamte number of fixings required.

5. Fixing Ridges
Commence fixing ridges at the opposite end of the roof to prevailing winds. Overlaps should be 125mm. Additional purlins should be fitted to suit.

6. Fixing Verges
Verges should be by either nailing the final corrugation over a raised barge board or using a ridge piece to lay over the verge.

Coroline Installation Guide

Related Products

corrugated bitumen roof sheet ridge
Coroline and Onduline Ridge for Bitumen Roof Sheets at 1m Long are Available in Black, Green, Red and Brown with 875mm Cover.
(Inc VAT £7.10)
corrugated bitumen coroline roof sheet fixing pack
Coroline Fixings for Bitumen Roof Sheets are Available in Black, Green, Red and Brown in Packs of 20 or 400
(Inc VAT £3.24)
corrugated bitumen roof sheet eaves filler
Coroline and Onduline Polyethylene Eaves Fillers for Bitumen Roof Sheets 840mm Pack of Six. Used to Seal the Gaps Created by the Corrugations of Roof Sheets, Preventing Water and Air Ingress.
(Inc VAT £7.63)
corrugated bitumen roof sheet verge
Coroline and Onduline Verge for Bitumen Roof Sheets are Available in Black, Green, Red and Brown with 975mm Cover
(Inc VAT £9.09)
corrugated bitumen profile pvc translucent roof sheet
Coroline and Onduline PVC Translucent Panel to Match Bitumen Roof Sheets. 1.2mm Thick, 950mm Wide and 2 Metres Long. Enables Light Transmisson.
(Inc VAT £19.98)
corrugated bitumen roof sheet apron flashing
Coroline and Onduline Flashing for Bitumen Roof Sheets are 930mm Long in Black Only. Seals the Gap Between Sheets and The Vertical Wall with 846mm Cover
(Inc VAT £13.92)
corrugated bitumen roof sheet eaves tray
Coroline and Onduline Eaves Tray for Bitumen Roof Sheets are 1500mm Long. Eaves Tray's Help Form a Drip Edge Into the Gutter by Fitting Along the Eaves and Under the Sheet with 1350mm Cover
(Inc VAT £3.16)
corrugated bitumen roof sheet ventilator strip
Coroline and Onduline Ventilator Comb for Bitumen Roof Sheets are 1010mm Long and in Black Only. Used to Provide Ventilation to The Eaves Whilst Preventing Large Insects and Birds Into the Roof Space
(Inc VAT £8.38)
Customer Reviews (0)