Corrugated PVC Fixings Pack of Ten
CODE: 35000
£ 2.37(Inc VAT £2.84)
Vistalux Fixings for 3 Inch Asbestos and Iron 8/3 Profile PVC Corrugated Roof Sheets in Packs of Ten
Order in the next Hours Mins and Seconds,
To get your watch delivered on Tuesday
Sorry this item is out of stock

Corrugated PVC Fixings Pack of Ten

Vistalux Corrugated PVC Sheets are Easy to Install, Lightweight and Economic. A Versatile Rooflight Sheet for Car Ports, Canopies and Gazebos. Easy to Cut, Drill and Install with Standard DIY Tools with a Choice of Corrugated Profiles.

Holes for the Fixings must be Drilled Larger than the Fixings, in order to Allow for Expansion, Typically 10mm for a 3m Sheet. Should be at Least 5 Fixings per Support Across the Width of the Sheet.
 
Fixings Requirements
 
Divide the roof width by the fixing centres. Divide the roof length by the support centres and add 1.
Multiply these two values together.
 
= approximate number of fixings required.

Applications:
Canopies
Car Ports
Covered Walkways
Porches
Splash Barriers
Side Cladding
Cold Frames
 
Availability: In stock
Estimated Delivery: 3-5 working days
Manufacturer: Ariel Plastics
Product Code: 35000 (Pack of Ten)

►Return to product list
DELIVERY INFORMATION

We offer a free standard delivery service on all orders over £500.00*. Orders under £500.00* will be charged £15.00* carriage.
Our standard delivery area covers mainland England, Scotland (Excluding Highlands) and Wales. For all other areas around the UK an additional delivery charge will need to be applied, we will advise you of this charge before your order is dispatched. For deliveries to these areas we are happy to provide a free quotation upon request.

DELIVERY DATES AND TIMES

We will always do our best to deliver stocked items ordered via our website within 3-5 working days. This applies to  goods ordered before 12.00pm and in stock.
Some of our products, because of their size (5m and over) and weight (over 80 kilos), have an estimated 3 to 5 working day lead time but we will endeavour to get them to you as soon as possible.
All the Roof Vent Products are made to order and have an estimated 7-10 working day lead time. This can be reduced for sites wishing to call off quantities that have been given to us in advance (call for further information). Please note: All Roof Vents are made to order and non returnable.
The Mardome Hi-Lights Range of Dome Rooflights have a 48 hour delivery schedule. Orders must be received by 1pm to qualify for the 48 hour (2 working days) delivery. Only available to mainland GB (excluding postcode areas begining KW, IV, AB, and PH)
CORRAPOL-BT Bitumen Roofing Sheets 1-2 working days.
We regret that timed deliveries cannot be given. Deliveries will be made between 8.00am and 5.30pm Monday to Friday.

SIGNING FOR YOUR DELIVERY

All deliveries should be signed for and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.

ACCEPTING YOUR GOODS

Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs in the course of such unloading.
Any shortages must be reported within 48 hours.

DELIVERY VEHICLE
 
If goods aren't sent by our own vehicles they are sent by reputable carriers such as Tufnell's, Fed-Ex  and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded as close as possible to the property whilst remaining on a hard standing surface.

GOOD ADVICE

Please do not arrange any labour until your materials are on site as we are unable to compensate you for your time in the event of a late delivery.
 
If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 267 or email: customerservices
 
*excluding VAT

Corrugated PVC Sheet Installation Guides

1. Preperation
For a Car Port or Lean Too installation you will need:
  • Vistalux PVC Roofing Sheet
  • Vistalux PVC Roof Flashing
  • Vistalux PE Eaves Filler
  • Vistalux Super Fixings
  • Flashing Tape

A minimum slope of 5 degrees is essential in any structure to ensure water run-off (10 degrees or more is better)
2. Cutting Sheets
Arrange the sheets loosely on the roof, mark hole positions and any necessary saw cuts with a felt tip pen.
Sheets should overhang the roof by 60mm to allow rainfall to run-off into the gutter and should be wide enough to cover the barge board at the side.
If cutting is required use an angle grinder with a metal slitting blade or fine tooth saw at a shallow angle with light pressure. Support the sheet to minimise vibrations.
A good tip when cutting is to sandwich the sheet between other sheets with the part to be removed protruding.
If a sheet has to be cut to a finished width, make the cut in the slope of the corrugated sheet.
Avoid drilling and cutting sheets in very cold weather. Warm sheets will be less prone to damage. If possible store sheets in a warm room before cutting.

3. Drilling Sheets
Pre-drill sheets before fixing. Please note - holes for fixings must be drilled larger than the fixing to allow for expansion. Typically 10mm for a 3mm sheet.
Drill sheets singly with a masonary bit using a low speed drill and light pressure. Support the sheet securely under each hole position when drilling.
There should be at least 5 fixings per support across the width of the sheet.

4. Flashing
Vistalux wall flashing to match the sheet corrugation is installed at the top of the slope. The Wall Flashing is fixed firmly into position with Butyl wall flashing tape to form a watertight seal between the sheet and the wall.

5. Fixing
Start fixing the sheets.
Ariel foam fillers are used under the sheets at all support positions to prevent roof 'chatter' and to support the sheets when fixed.
Use Ariel screws, caps and washers to secure the sheet: the screw is sufficently tight when the washer under its head can just be rotated with the finger and thumb.

6. Joining Sheets (end to end)
If sheets need to be joined end to end, ensure an overlap of at least 150mm for a 10 degree slope or 300mm for a 5 degree slope.
Use a strip of Butyl Sealing Tape to prevent dust and dirt getting between the sheets.

Corrugated PVC Sheet Installation Guide

How to install a PVC Carport

Related Products

3 inch corrugated pvc roof sheet lightweight
Vistalux Lightweight 0.8mm Thick Clear Corrugated PVC Roof Sheets at 762mm Wide Matches 3 inch Asbestos Profile Sheets. Available in 6ft, 7ft, 8ft, 9ft and 10ft Lengths - 5 sheets (mixed) is the minimum order requirement for corrugated sheets
£7.61
(Inc VAT £9.14)
3 inch corrugated pvc roof sheet heavy duty
Vistalux Heavy Duty 1.1mm Thick Clear Corrugated PVC Roof Sheets at 762mm Wide Matches 3 inch Asbestos Profile Sheets. Available in 6ft, 7ft, 8ft, 9ft, 10ft and 12ft Lengths - 5 sheets (mixed) is the minimum order requirement for corrugated sheets
£11.54
(Inc VAT £13.85)
3 inch corrugated pvc roof sheet superweight
Vistalux Superweight 1.3mm Thick Clear Corrugated PVC Roof Sheets at 762mm Wide Matches 3 inch Asbestos Profile Sheets. Available in 6ft, 7ft, 8ft, 9ft, 10ft and 12ft Lengths - 5 sheets (mixed) is the minimum order requirement for corrugated sheets
£12.44
(Inc VAT £14.93)
3 inch profile polyethylene eaves filler
Vistalux Polyethylene Eaves Filler for 3 Inch Asbestos Profile PVC Corrugated Roof Sheets in Packs of Six at 680mm Long
£7.38
(Inc VAT £8.86)
3 inch profile clear adjustable ridge 685mm
Vistalux Clear Adjustable Ridge for 3 Inch Asbestos Profile PVC Corrugated Roof Sheets at 685mm Wide
£16.66
(Inc VAT £20.00)
3 inch profile clear adjustable ridge 1090mm
Vistalux Clear Adjustable Ridge for 3 Inch Asbestos Profile PVC Corrugated Roof Sheets at 1090mm Wide. This is Supplied as One Side Only. Use Two for a One Metre Ridge
£16.66
(Inc VAT £20.00)
corrugated pvc clear wall flashing
Vistalux Clear Wall Flashing for 3 Inch Asbestos Profile PVC Corrugated Roof Sheets at 695mm Long
£10.66
(Inc VAT £12.80)
corrugated pvc sealing strip 15m
A white self-adhesive strip developed for use when installing Vistalux PVC Roofing Sheet. Use along sheet joins to create a watertight seal between sheets to prevent the ingress of water and dirt
£8.79
(Inc VAT £10.55)
Customer Reviews (0)