Current Delivery Schedule – We Are Open & Processing Orders - Please Click Here For the Latest Delivery Information.
search
Dry Fix Roll Out Tray 300mm x 6m Harcon URS6/RT
Dry Fix Roll Out Tray 300mm x 6m Harcon URS6/RT
Code: URS6/RT
£ 26.00
(Inc £31.20)
Corovent Universal Dry Fix Ridge Roll Out Tray 300mm x 6m URS6/RT
Universal Dry Fix Ridge Roll Out Tray 6m x 300mm.

This dry fix solution eliminates the need to carry mortar to the top of the roof making ridge installation with the complete Universal Dry Ridge System easier, quicker and safer.

Features:
  • Designed for standard ridge tiles at 450mm width
Manufacturer: Harcon Corovent
Product Code: URS6/RT

►Return to product list
DELIVERY INFORMATION

We offer a free standard delivery service on all orders over £500.00*. Orders under £500.00* will be charged £15.00* carriage.
Our standard delivery area covers mainland England, Scotland (Excluding Highlands) and Wales. For all other areas around the UK an additional delivery charge will need to be applied, we will advise you of this charge before your order is dispatched. For deliveries to these areas we are happy to provide a free quotation upon request.
Please note: Roof Vents are not available for delivery to Ireland and Northern Ireland.

DELIVERY DATES AND TIMES

Please click here or see COVID-19 banner at the top of the page for the latest delivery shedule.

We will always do our best to deliver stocked items ordered via our website within 3-5 working days. This applies to  goods ordered before 12.00pm and in stock.
Some of our products, because of their size (5m and over) and weight (over 80 kilos), have an estimated 3 to 5 working day lead time but we will endeavour to get them to you as soon as possible.
All the Roof Vent Products are made to order and have an estimated 7-10 working day lead time. This can be reduced for sites wishing to call off quantities that have been given to us in advance (call for further information). Please note: All Roof Vents are made to order and non returnable.
Please note: Roof Vents are not available for delivery to Ireland and Northern Ireland.
The Mardome Hi-Lights Range of Dome Rooflights have a 48 hour delivery schedule. Orders must be received by 1pm to qualify for the 48 hour (2 working days) delivery. Only available to mainland GB (excluding postcode areas begining KW, IV, AB, and PH)
CORRAPOL-BT Bitumen Roofing Sheets 1-2 working days.
We regret that timed deliveries cannot be given. Deliveries will be made between 8.00am and 5.30pm Monday to Friday.

SIGNING FOR YOUR DELIVERY

All deliveries should be signed for and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.

ACCEPTING YOUR GOODS

Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs in the course of such unloading.
Any shortages must be reported within 48 hours.

DELIVERY VEHICLE
 
If goods aren't sent by our own vehicles they are sent by reputable carriers such as Tufnell's, Fed-Ex  and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded as close as possible to the property whilst remaining on a hard standing surface.

GOOD ADVICE

Please do not arrange any labour until your materials are on site as we are unable to compensate you for your time in the event of a late delivery.
 
If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 267 or email: customerservices
 
*excluding VAT

Corovent URS Universal Dry Ridge System Installation Guide

1.
Fix one bracket at each rafter. Bend lower legs of bracket to chosen ridge tiles, allowing stainless steel fixing screw (see stage 6) to penetrate ridge batten at a minimum of 20mm.

Correct bending position is best found by temporarily placing top tile batten and a few roof and ridge tiles and eyeing up bracket position beneath ridge tile. Subsequent brackets should be bent identically to the first.

2a. Push ridge batten (minimum 25mm x 50mm) firmly onto location spikes.
CAUTION: DO NOT USE A HAMMER - PUSH BATTEN ONLY.

2b. When ridge batten is in place, bend bracket upper legs over and fix through holes with nails provided.
CAUTION: TAKE CARE NOT TO FURTHER BEND BRACKET LOWER LEGS WHEN FIXING.
Proceed to lay top row of tiles.

3. Unroll ridge-roll and fix with a nail at 1-2m centres. Ridge roll should overlap at edge of gable end by approx. 50mm when using a dry verge or block end ridge tile. When using a bedded verge, stop ridge roll 50mm short from edge of gable end.
Peel backing from mastic strips and press firmly onto tile, checking for good adhesion. Do not attempt fixing if tile is wet or temperature is below 5 degrees C.
If ridge is longer than 6m, overlap rolls by a minimum of 75mm and place a nail in the centre of the lap.

4. Assemble cap to union and push onto ridge tile.
Cap and union assembly should grip ridge tile without deformation to cap.
Only if needed i.e. triangular ridge tiles, cap arms can be bent at bend point indicated.
CAUTION: BEND ONLY ONCE. REPEATED BENDING CAN OVERSTRESS THE COMPONENT AND LEAD TO PREMATURE FAILURE.

5. Push next ridge tile firmly into place, trapping it between the cap and the union. Ridge tiles at end of ridge must be full tiles, do not cut down.

6. Fix through hole in centre of cap using 75mm stainless steel screws provided.
CAUTION: DO NOT USE NAILS.
Screw should be tightened so that ridge tiles do not lift.
Cap should not deform more than 3mm from its original shape.

NOTE: If at this point it is discovered that the brackets were not set high enough at stage 1. another batten can be screw fixed on top of the original to achieve correct engagement. Ensure additional batten does not block vent holes in ridge roll.
7. Click side arms into place.
Data Sheets for the Dry Ridge System

Corovent Universal Ridge System (URS) Leaflet

Corovent Dry Fix Ridge Data Sheet

Guidance

Simple Installation
  1. Fix one bracket at each rafter. Bend lower legs of bracket to suit chosen ridge tile, allowing stainless steel fixing screw (see stage 7) to penetrate ridge batten at a minimum of 20mm. Correct bending position is best found by temporarily placing top tile batten and a few roof and ridge tiles and eyeing up bracket position beneath ridge tile. Subsequent brackets should be bent identically to the first.
  2. Push ridge batten (min 25mm x 50mm) firmly onto location spikes. Caution: Do not use a hammer - push batten only!
  3. When ridge batten is in place, bend bracket upper legs over and fix through holes with nails provided. Caution: Take care not to further bend bracket lower legs when fixing! Proceed to lay top row of roof tiles.
  4. Unroll ridge-roll and fix with nail at 1-2m centres. Peel backing from mastic strips and press firmly onto tile, checking for good adhesion. Do not attempt fixing if tile is wet or temperature is below 5°c. If ridge is longer than 6m, overlap rolls by a minimum of 75mm and place a nail in the of the lap.
  5. Pre-bend union to match ridge tile. Assemble cap to union and push onto ridge tile. Cap & Union assembly should grip ridge tile without deformation to cap. Only if needed i.e. triangular ridge tiles, cap arms can be bent at bend point indicated. Caution: Bend once only. Repeated bending can overstress the component and lead to premature failure!
  6. Push next ridge tile firmly into place, trapping it between the cap and the union.
  7. Fix through hole in centre of cap using 75mm stainless steel screws provided. Caution: Do not use nails! Screw should be tightened so that ridge tiles do not lift. Cap should not deform more than 3mm from its original shape. Note: If at this point it is discovered that the brackets were not set high enough at stage 1, another batten can be screw fixed on top of the original to achieve correct engagement. Ensure additional batten does not block vent holes in ridge roll.
  8. Click side arms into place. Ridge roll should overlap at edge of gable end by approx. 50mm when using a dry verge or black end ridge tile. When using a bedded verge, stop ridge roll 50mm short from edge of gable end. Ridge tiles at end of ridge must be full tiles, do not cut down.
Universal Dry Fix Ridge Roll Out Tray 6m x 300mm.

This dry fix solution eliminates the need to carry mortar to the top of the roof making ridge installation with the complete Universal Dry Ridge System easier, quicker and safer.

Features:
  • Designed for standard ridge tiles at 450mm width
Manufacturer: Harcon Corovent
Product Code: URS6/RT

►Return to product list
DELIVERY INFORMATION

We offer a free standard delivery service on all orders over £500.00*. Orders under £500.00* will be charged £15.00* carriage.
Our standard delivery area covers mainland England, Scotland (Excluding Highlands) and Wales. For all other areas around the UK an additional delivery charge will need to be applied, we will advise you of this charge before your order is dispatched. For deliveries to these areas we are happy to provide a free quotation upon request.
Please note: Roof Vents are not available for delivery to Ireland and Northern Ireland.

DELIVERY DATES AND TIMES

Please click here or see COVID-19 banner at the top of the page for the latest delivery shedule.

We will always do our best to deliver stocked items ordered via our website within 3-5 working days. This applies to  goods ordered before 12.00pm and in stock.
Some of our products, because of their size (5m and over) and weight (over 80 kilos), have an estimated 3 to 5 working day lead time but we will endeavour to get them to you as soon as possible.
All the Roof Vent Products are made to order and have an estimated 7-10 working day lead time. This can be reduced for sites wishing to call off quantities that have been given to us in advance (call for further information). Please note: All Roof Vents are made to order and non returnable.
Please note: Roof Vents are not available for delivery to Ireland and Northern Ireland.
The Mardome Hi-Lights Range of Dome Rooflights have a 48 hour delivery schedule. Orders must be received by 1pm to qualify for the 48 hour (2 working days) delivery. Only available to mainland GB (excluding postcode areas begining KW, IV, AB, and PH)
CORRAPOL-BT Bitumen Roofing Sheets 1-2 working days.
We regret that timed deliveries cannot be given. Deliveries will be made between 8.00am and 5.30pm Monday to Friday.

SIGNING FOR YOUR DELIVERY

All deliveries should be signed for and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.

ACCEPTING YOUR GOODS

Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs in the course of such unloading.
Any shortages must be reported within 48 hours.

DELIVERY VEHICLE
 
If goods aren't sent by our own vehicles they are sent by reputable carriers such as Tufnell's, Fed-Ex  and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded as close as possible to the property whilst remaining on a hard standing surface.

GOOD ADVICE

Please do not arrange any labour until your materials are on site as we are unable to compensate you for your time in the event of a late delivery.
 
If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 267 or email: customerservices
 
*excluding VAT

Corovent URS Universal Dry Ridge System Installation Guide

1.
Fix one bracket at each rafter. Bend lower legs of bracket to chosen ridge tiles, allowing stainless steel fixing screw (see stage 6) to penetrate ridge batten at a minimum of 20mm.

Correct bending position is best found by temporarily placing top tile batten and a few roof and ridge tiles and eyeing up bracket position beneath ridge tile. Subsequent brackets should be bent identically to the first.

2a. Push ridge batten (minimum 25mm x 50mm) firmly onto location spikes.
CAUTION: DO NOT USE A HAMMER - PUSH BATTEN ONLY.

2b. When ridge batten is in place, bend bracket upper legs over and fix through holes with nails provided.
CAUTION: TAKE CARE NOT TO FURTHER BEND BRACKET LOWER LEGS WHEN FIXING.
Proceed to lay top row of tiles.

3. Unroll ridge-roll and fix with a nail at 1-2m centres. Ridge roll should overlap at edge of gable end by approx. 50mm when using a dry verge or block end ridge tile. When using a bedded verge, stop ridge roll 50mm short from edge of gable end.
Peel backing from mastic strips and press firmly onto tile, checking for good adhesion. Do not attempt fixing if tile is wet or temperature is below 5 degrees C.
If ridge is longer than 6m, overlap rolls by a minimum of 75mm and place a nail in the centre of the lap.

4. Assemble cap to union and push onto ridge tile.
Cap and union assembly should grip ridge tile without deformation to cap.
Only if needed i.e. triangular ridge tiles, cap arms can be bent at bend point indicated.
CAUTION: BEND ONLY ONCE. REPEATED BENDING CAN OVERSTRESS THE COMPONENT AND LEAD TO PREMATURE FAILURE.

5. Push next ridge tile firmly into place, trapping it between the cap and the union. Ridge tiles at end of ridge must be full tiles, do not cut down.

6. Fix through hole in centre of cap using 75mm stainless steel screws provided.
CAUTION: DO NOT USE NAILS.
Screw should be tightened so that ridge tiles do not lift.
Cap should not deform more than 3mm from its original shape.

NOTE: If at this point it is discovered that the brackets were not set high enough at stage 1. another batten can be screw fixed on top of the original to achieve correct engagement. Ensure additional batten does not block vent holes in ridge roll.
7. Click side arms into place.
Data Sheets for the Dry Ridge System

Corovent Universal Ridge System (URS) Leaflet

Corovent Dry Fix Ridge Data Sheet

Guidance

Simple Installation
  1. Fix one bracket at each rafter. Bend lower legs of bracket to suit chosen ridge tile, allowing stainless steel fixing screw (see stage 7) to penetrate ridge batten at a minimum of 20mm. Correct bending position is best found by temporarily placing top tile batten and a few roof and ridge tiles and eyeing up bracket position beneath ridge tile. Subsequent brackets should be bent identically to the first.
  2. Push ridge batten (min 25mm x 50mm) firmly onto location spikes. Caution: Do not use a hammer - push batten only!
  3. When ridge batten is in place, bend bracket upper legs over and fix through holes with nails provided. Caution: Take care not to further bend bracket lower legs when fixing! Proceed to lay top row of roof tiles.
  4. Unroll ridge-roll and fix with nail at 1-2m centres. Peel backing from mastic strips and press firmly onto tile, checking for good adhesion. Do not attempt fixing if tile is wet or temperature is below 5°c. If ridge is longer than 6m, overlap rolls by a minimum of 75mm and place a nail in the of the lap.
  5. Pre-bend union to match ridge tile. Assemble cap to union and push onto ridge tile. Cap & Union assembly should grip ridge tile without deformation to cap. Only if needed i.e. triangular ridge tiles, cap arms can be bent at bend point indicated. Caution: Bend once only. Repeated bending can overstress the component and lead to premature failure!
  6. Push next ridge tile firmly into place, trapping it between the cap and the union.
  7. Fix through hole in centre of cap using 75mm stainless steel screws provided. Caution: Do not use nails! Screw should be tightened so that ridge tiles do not lift. Cap should not deform more than 3mm from its original shape. Note: If at this point it is discovered that the brackets were not set high enough at stage 1, another batten can be screw fixed on top of the original to achieve correct engagement. Ensure additional batten does not block vent holes in ridge roll.
  8. Click side arms into place. Ridge roll should overlap at edge of gable end by approx. 50mm when using a dry verge or black end ridge tile. When using a bedded verge, stop ridge roll 50mm short from edge of gable end. Ridge tiles at end of ridge must be full tiles, do not cut down.
Customer Reviews (0)