Contact Us
Tapco Cold Roof Eaves Ventilation 10mm Kit
Item Code: TEVK10

Tapco Cold Roof Eaves Ventilation 10mm Kit

£32.75
( Incl VAT £39.30)
Tapco Cold Roof Eaves Ventilation 10mm Kit are recommended for low-level roof ventilation in cold roof construction. Provides a ventilation opening of 10,000mm2 alongg the eaves. Contains 6 lengths of 10mm over fascia vent, 1 x 300mm x 6m rafter roll and 10 eaves skirts.
Est. Delivery 5 - 7 Working Days
Order in the next Hours Mins and Seconds,
To get your item delivered on Monday

Tapco Cold Roof Eaves Ventilation 10mm Kit

Tapco Cold Roof Eaves Ventilation Kits are recommended for low-level roof ventilation in cold roof construction. Suitable for loft space ventilation for colds roofs, whilst keeping debris and insects from stopping the airflow. Install continuously along the eaves and provides a ventilation opening of 10,000mm2. Kit consists of 10mm over fascia vents and eaves skirts in a 6-linear-metre pack, along with a 300mm x 6m Rafter Ventilation Roll since most cold roofs are felt and batten construction.

  • Cold roof continuous Eaves Ventilation
  • Provides 10,000mm2 Ventilation
  • Kits includes 10mm over fascia vents, eaves skirts and 300mm Rafter Ventilation Roll (all 6m)

Manufacturer: Tapco Roofing Products

Product Code: TEVK10

Return To Product List
 

Delivery Information


Delivery Charges

We offer a free standard delivery service on all orders over £500.00*. Orders under £500.00* will be charged a delivery fee. All delivery charges are calculated at basket and are dependent on the items ordered.

Our standard delivery area covers mainland England, Scotland (Excluding Highlands) and Wales. For all other areas around the UK an additional delivery charge will need to be applied, we will advise you of this charge before your order is dispatched. For deliveries to these areas we are happy to provide a free quotation upon request.

Free Delivery Exclusions

  • All Tapco Products
  • Roof Vents are not available for delivery to Ireland and Northern Ireland.

Mardome Rooflights

It is important to note that all Mardome rooflight orders are subject to a failed delivery charge in the event of unsuccessful delivery. This fee is £85 ex VAT and must be taken into account when making your purchase.

If you wish to return your order, please contact us. However, it is important to note that due to many Mardome rooflights being made to order, returns are only accepted in exceptional circumstances and a collection charge of £85 ex VAT will be applied if approved. We recommend taking the time to review your order carefully before making payment as this fee is non-refundable.

Should you have any queries regarding Mardome rooflights, please don't hesitate to contact us. Our team are dedicated to providing excellent customer service and will be more than happy to answer any questions you may have.


Delivery Dates and Times

We will always do our best to deliver stocked items ordered via our website within 3-5 working days. This applies to goods ordered before 12.00pm and in stock.

Please see estimated delivery times (Est. Delivery) on each product.


Roof Tile Vents

All the Roof Tile Vents and Cowls are made to order (due to thousands of combinations of different variants available) bespoke items which are non-returnable.
 


Other Information

Some of our products, because of their size (5m and over) and weight (over 80 kilos), have an estimated 5 to 7 working day lead time but we will endeavour to get them to you as soon as possible.

Maximum number of roof sheets available on one delivery is 40, otherwise a forklift is required please call for more information.

The Mardome Hi-Lights Range of Dome Rooflights have a 48 hour delivery schedule. Orders must be received by 1pm to qualify for the 48 hour (2 working days) delivery. Only available to mainland GB (excluding postcode areas begining KW, IV, AB, and PH).

We regret that timed deliveries cannot be given. Deliveries will be made between 8.00am and 5.30pm Monday to Friday.


Made to Order Item's (Bespoke Items)

Please note all made to order items are made are non-returnable.

Signing For Your Delivery

All deliveries should be signed for and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.

Accepting Your Goods

Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs in the course of such unloading.

Any shortages or damages must be reported within 48 hours.

Delivery Vehicle

If goods aren't sent by our own vehicles they are sent by reputable carriers such as Tufnell's, Fed-Ex and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded as close as possible to the property whilst remaining on a hard standing surface.

Good Advice

Please do not arrange any labour until your materials are on site as we are unable to compensate you for your time in the event of a late delivery.

If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 267 or email: [email protected]

*excluding VAT

Tapco Synthetic Slate Roof Tile Installation Guidance


Tapco provide a simple and easy to use installation guides which are available below.

Tapco Slate Roof Tile Installation Guide

Tapco Ridge, Hip & Valley Installation Guide

Tapco Roof Tile Vent Installation Guide

Tapco Warm and Cold Roof Structures Installation Guide

Tapco Special Instructions Installation Guide
 

Tapco Slate Technical Details

WARRANTY: 40 Years ROOFING BOARD: 0.7" (18mm) OSB.
WEIGHT (CLASSIC SLATE): 0.7 kg MINIMUM PITCH: 14° (Felt & Batten and Fully Boarded).
WEIGHT (CLASSIC RIDGE): 0.7 kg MAXIMUM PITCH: 90° (Felt & Batten and Fully Boarded).
DRILLING: No drilling required SORTING: No sorting required.
PACKAGING (CLASSIC 12"): Pallet: 1600 slates (1.04 tonnes), Bundle: 25 slates (16.25 kg). BATTEN SIZE: 2" x 1" (50mm x 25mm) treated battens (minimum).
ROOFING MEMBRANE:  Recommended use of impermeable (non-breathable) Type HR roofing membrane. CUTTING: Fine-toothed handsaw, jigsaw, circular saw, or sharp utility
blade (score and break).
 FIXING:  Large 10mm diameter head, galvanised 1.2" (30mm) by 0.1" (2.5mm) steel nails or 1.2" (30mm) by 0.14" (3.5mm) outdoor Phillips bugle
 screws (using hammer/screwdriver or nail/screw-gun). Longer 2" (50mm) nail or outdoor Phillips bugle screw required for fixing ridges
 and hips. Corrosion resistant fasteners are always recommended, especially in coastal areas. In Scotland we recommend the use of Stainless
 Steel nails for fixing. 7.1mm diameter nail heads are recommended when using a nail gun.
 
 

Tapco Slate Classic Pitch, Gauge, and Coverage

Roof Pitch Gauge Slates Per M2 Ridge & Hip Caps 1 Metre Length
14* to 25 degrees (fully boarded or felt & battens) 6" (152mm)
 
22 Ridge Cap 6 Units
25 to 27.5 degrees (fully boarded or felt & battens)
 
6.5" (165mm) 20 Hip Cap 6 Units
27.5 to 30 degrees (fully boarded or felt & battens) 7" (178mm) 19
 
 
above 30 degrees (fully boarded or felt & battens) 7.5" (191mm) 18
 
 

* The minimum recommended pitch and lap may be influenced by special circumstances, please contact us.
 
Ratings & Certification
Testing Findings Testing Findings
Fire Rating: BS476 Pt. 3, Boarded Roof SAA/Battened Roof SAC. Freeze/Thaw Cycle: No damage or cracking after 300 cycles.
Hail Rating: Class IV. Water Absorption: No appreciable weight gain.
Wind-driven Rain/Uplift: Miami Dade TAS-100 (110mph) & BRE EN 15601. Water Permeation: Impermeable.
Accelerated UV Exposure: No cracking or splitting. Temperature Cycling: No cracking, deformation or expansion.
 

If you have any other questions regard installation you can contact us via email ([email protected]) or by phone on 03302 230 267.

 

Frequently Asked Questions


Q: What are the Tapco Slates made out of?
A: Tapco Slates are manufactured from a blend of limestone and virgin polypropylene, and are made from multiple natural patterns. TapcoSlate is not made from recycled materials but can be recycled at the end of its long lifespan.

Q: What roof pitch can the tapco slates be fitted to?
A:
Tested to BBA approval on roof pitches of 14° to 70° on both felt & batten and fully-boarded roofing applications (a minimum pitch of 20° is needed for quaried slate)

Q: How heavy is a square meter of tapco slate?
A:
TapcoSlate Classic can weigh as little as 12kg per square metre, which is ideal for structures needing a light footprint or with older timbers that cannot take heavier-weight roofing tiles
 
Q: How Should I Store Tapco Slate Roof Tiles?
A:
Tapco slates need to be stored on the original pallet on a flat surface. Proper storage of the product at the job site is important. Classic slates are cambered to ensure that maximum pressure is transferred to the leading edge of the slate during installation and should be stacked face down (as originally delivered). Do not double stack pallets.

Q: Is The Tapco Slate Tiles Recyclable
A:
TapcoSlate is 100% recyclable, but is not marked with a recycling symbol/logo and so the contractor should contact a local recycler to make the necessary arrangements, stating that the product is "mineral-filled Polypropylene" plastic. If there is any difficulty in locating a recycling facility, please contact us. Note that skip companies will send the product to the correct recycler.
 
Q: Do the tapco slates require any special tools to fit?
A:
No special tools are required to fit tapco synthetic slates (see tools below)
• Hand fastened (hammered or screwed) or fastened with a nail/screw gun.
• Sharp utility blade or a standard circular saw.
• Tape measure, pry bar, tin snips.
• Chalk line with blue chalk (do not use red chalk as this can stain the product).

Q: What Roof Decking Materials are recommened with Tapco roof slates?
A:
A Minimum of 23/32" (18mm) plywood decking, solid wood decking, or oriented strand board (OSB).

Q: What Roofing membrane/underlay should be used with tapco slate?
A:
TapcoSlate Classic roofing slates are classed as insufficiently air-open products and therefore, following the guidance within BS 5250, a vapour impermeable (HR) roof membrane/underlay should be used. Tapco Roofing Products recommends Protect Wunderlay for TapcoSlate Classic.

Q:Should there be a spacing inbetween the slates?
A:
0.25" (6mm) spacer tabs are provided on every Classic slate to aid in maintaining consistent spacing. The spacers will allow for any movement of the roof deck and expansion/contraction of the slate (although thermal expansion is highly unlikely in European climates). DO NOT remove the spacer tabs unless finishing at the end of the course.

Q: Are these slates covered by a warranty?
A:
Tapco Slate has a 40 year warranty.

Q: How do I cut tapco slate?
A:
Tapco Slate Classic can be easily scored with a standard utility knife and snapped down the line, alternatively it can be cut and shaped with a standard plastics saw or power jigsaw

If you have any other questions about this product please do not hesistate to contact us on live chat, via email ([email protected]) or by phone on 03302 230 267.

 

Tapco Cold Roof Eaves Ventilation 10mm Kit

Tapco Cold Roof Eaves Ventilation Kits are recommended for low-level roof ventilation in cold roof construction. Suitable for loft space ventilation for colds roofs, whilst keeping debris and insects from stopping the airflow. Install continuously along the eaves and provides a ventilation opening of 10,000mm2. Kit consists of 10mm over fascia vents and eaves skirts in a 6-linear-metre pack, along with a 300mm x 6m Rafter Ventilation Roll since most cold roofs are felt and batten construction.

  • Cold roof continuous Eaves Ventilation
  • Provides 10,000mm2 Ventilation
  • Kits includes 10mm over fascia vents, eaves skirts and 300mm Rafter Ventilation Roll (all 6m)

Manufacturer: Tapco Roofing Products

Product Code: TEVK10

Return To Product List
 

Delivery Information


Delivery Charges

We offer a free standard delivery service on all orders over £500.00*. Orders under £500.00* will be charged a delivery fee. All delivery charges are calculated at basket and are dependent on the items ordered.

Our standard delivery area covers mainland England, Scotland (Excluding Highlands) and Wales. For all other areas around the UK an additional delivery charge will need to be applied, we will advise you of this charge before your order is dispatched. For deliveries to these areas we are happy to provide a free quotation upon request.

Free Delivery Exclusions

  • All Tapco Products
  • Roof Vents are not available for delivery to Ireland and Northern Ireland.

Mardome Rooflights

It is important to note that all Mardome rooflight orders are subject to a failed delivery charge in the event of unsuccessful delivery. This fee is £85 ex VAT and must be taken into account when making your purchase.

If you wish to return your order, please contact us. However, it is important to note that due to many Mardome rooflights being made to order, returns are only accepted in exceptional circumstances and a collection charge of £85 ex VAT will be applied if approved. We recommend taking the time to review your order carefully before making payment as this fee is non-refundable.

Should you have any queries regarding Mardome rooflights, please don't hesitate to contact us. Our team are dedicated to providing excellent customer service and will be more than happy to answer any questions you may have.


Delivery Dates and Times

We will always do our best to deliver stocked items ordered via our website within 3-5 working days. This applies to goods ordered before 12.00pm and in stock.

Please see estimated delivery times (Est. Delivery) on each product.


Roof Tile Vents

All the Roof Tile Vents and Cowls are made to order (due to thousands of combinations of different variants available) bespoke items which are non-returnable.
 


Other Information

Some of our products, because of their size (5m and over) and weight (over 80 kilos), have an estimated 5 to 7 working day lead time but we will endeavour to get them to you as soon as possible.

Maximum number of roof sheets available on one delivery is 40, otherwise a forklift is required please call for more information.

The Mardome Hi-Lights Range of Dome Rooflights have a 48 hour delivery schedule. Orders must be received by 1pm to qualify for the 48 hour (2 working days) delivery. Only available to mainland GB (excluding postcode areas begining KW, IV, AB, and PH).

We regret that timed deliveries cannot be given. Deliveries will be made between 8.00am and 5.30pm Monday to Friday.


Made to Order Item's (Bespoke Items)

Please note all made to order items are made are non-returnable.

Signing For Your Delivery

All deliveries should be signed for and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.

Accepting Your Goods

Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs in the course of such unloading.

Any shortages or damages must be reported within 48 hours.

Delivery Vehicle

If goods aren't sent by our own vehicles they are sent by reputable carriers such as Tufnell's, Fed-Ex and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded as close as possible to the property whilst remaining on a hard standing surface.

Good Advice

Please do not arrange any labour until your materials are on site as we are unable to compensate you for your time in the event of a late delivery.

If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 267 or email: [email protected]

*excluding VAT

Tapco Synthetic Slate Roof Tile Installation Guidance


Tapco provide a simple and easy to use installation guides which are available below.

Tapco Slate Roof Tile Installation Guide

Tapco Ridge, Hip & Valley Installation Guide

Tapco Roof Tile Vent Installation Guide

Tapco Warm and Cold Roof Structures Installation Guide

Tapco Special Instructions Installation Guide
 

Tapco Slate Technical Details

WARRANTY: 40 Years ROOFING BOARD: 0.7" (18mm) OSB.
WEIGHT (CLASSIC SLATE): 0.7 kg MINIMUM PITCH: 14° (Felt & Batten and Fully Boarded).
WEIGHT (CLASSIC RIDGE): 0.7 kg MAXIMUM PITCH: 90° (Felt & Batten and Fully Boarded).
DRILLING: No drilling required SORTING: No sorting required.
PACKAGING (CLASSIC 12"): Pallet: 1600 slates (1.04 tonnes), Bundle: 25 slates (16.25 kg). BATTEN SIZE: 2" x 1" (50mm x 25mm) treated battens (minimum).
ROOFING MEMBRANE:  Recommended use of impermeable (non-breathable) Type HR roofing membrane. CUTTING: Fine-toothed handsaw, jigsaw, circular saw, or sharp utility
blade (score and break).
 FIXING:  Large 10mm diameter head, galvanised 1.2" (30mm) by 0.1" (2.5mm) steel nails or 1.2" (30mm) by 0.14" (3.5mm) outdoor Phillips bugle
 screws (using hammer/screwdriver or nail/screw-gun). Longer 2" (50mm) nail or outdoor Phillips bugle screw required for fixing ridges
 and hips. Corrosion resistant fasteners are always recommended, especially in coastal areas. In Scotland we recommend the use of Stainless
 Steel nails for fixing. 7.1mm diameter nail heads are recommended when using a nail gun.
 
 

Tapco Slate Classic Pitch, Gauge, and Coverage

Roof Pitch Gauge Slates Per M2 Ridge & Hip Caps 1 Metre Length
14* to 25 degrees (fully boarded or felt & battens) 6" (152mm)
 
22 Ridge Cap 6 Units
25 to 27.5 degrees (fully boarded or felt & battens)
 
6.5" (165mm) 20 Hip Cap 6 Units
27.5 to 30 degrees (fully boarded or felt & battens) 7" (178mm) 19
 
 
above 30 degrees (fully boarded or felt & battens) 7.5" (191mm) 18
 
 

* The minimum recommended pitch and lap may be influenced by special circumstances, please contact us.
 
Ratings & Certification
Testing Findings Testing Findings
Fire Rating: BS476 Pt. 3, Boarded Roof SAA/Battened Roof SAC. Freeze/Thaw Cycle: No damage or cracking after 300 cycles.
Hail Rating: Class IV. Water Absorption: No appreciable weight gain.
Wind-driven Rain/Uplift: Miami Dade TAS-100 (110mph) & BRE EN 15601. Water Permeation: Impermeable.
Accelerated UV Exposure: No cracking or splitting. Temperature Cycling: No cracking, deformation or expansion.
 

If you have any other questions regard installation you can contact us via email ([email protected]) or by phone on 03302 230 267.

 

Frequently Asked Questions


Q: What are the Tapco Slates made out of?
A: Tapco Slates are manufactured from a blend of limestone and virgin polypropylene, and are made from multiple natural patterns. TapcoSlate is not made from recycled materials but can be recycled at the end of its long lifespan.

Q: What roof pitch can the tapco slates be fitted to?
A:
Tested to BBA approval on roof pitches of 14° to 70° on both felt & batten and fully-boarded roofing applications (a minimum pitch of 20° is needed for quaried slate)

Q: How heavy is a square meter of tapco slate?
A:
TapcoSlate Classic can weigh as little as 12kg per square metre, which is ideal for structures needing a light footprint or with older timbers that cannot take heavier-weight roofing tiles
 
Q: How Should I Store Tapco Slate Roof Tiles?
A:
Tapco slates need to be stored on the original pallet on a flat surface. Proper storage of the product at the job site is important. Classic slates are cambered to ensure that maximum pressure is transferred to the leading edge of the slate during installation and should be stacked face down (as originally delivered). Do not double stack pallets.

Q: Is The Tapco Slate Tiles Recyclable
A:
TapcoSlate is 100% recyclable, but is not marked with a recycling symbol/logo and so the contractor should contact a local recycler to make the necessary arrangements, stating that the product is "mineral-filled Polypropylene" plastic. If there is any difficulty in locating a recycling facility, please contact us. Note that skip companies will send the product to the correct recycler.
 
Q: Do the tapco slates require any special tools to fit?
A:
No special tools are required to fit tapco synthetic slates (see tools below)
• Hand fastened (hammered or screwed) or fastened with a nail/screw gun.
• Sharp utility blade or a standard circular saw.
• Tape measure, pry bar, tin snips.
• Chalk line with blue chalk (do not use red chalk as this can stain the product).

Q: What Roof Decking Materials are recommened with Tapco roof slates?
A:
A Minimum of 23/32" (18mm) plywood decking, solid wood decking, or oriented strand board (OSB).

Q: What Roofing membrane/underlay should be used with tapco slate?
A:
TapcoSlate Classic roofing slates are classed as insufficiently air-open products and therefore, following the guidance within BS 5250, a vapour impermeable (HR) roof membrane/underlay should be used. Tapco Roofing Products recommends Protect Wunderlay for TapcoSlate Classic.

Q:Should there be a spacing inbetween the slates?
A:
0.25" (6mm) spacer tabs are provided on every Classic slate to aid in maintaining consistent spacing. The spacers will allow for any movement of the roof deck and expansion/contraction of the slate (although thermal expansion is highly unlikely in European climates). DO NOT remove the spacer tabs unless finishing at the end of the course.

Q: Are these slates covered by a warranty?
A:
Tapco Slate has a 40 year warranty.

Q: How do I cut tapco slate?
A:
Tapco Slate Classic can be easily scored with a standard utility knife and snapped down the line, alternatively it can be cut and shaped with a standard plastics saw or power jigsaw

If you have any other questions about this product please do not hesistate to contact us on live chat, via email ([email protected]) or by phone on 03302 230 267.

 
Customer Reviews (0)